Ornamental Iron Fence Jerome ID | Powder-Coated Steel

Last updated: 2026-08-16

Jerome Idaho Fence Pros is a fence company serving Jerome and the Magic Valley, and ornamental iron fence installation is one of the services we build most. This page covers what the work involves here specifically — the ground, the climate, the code, and what it costs — rather than what it involves in general.

What we do on the first visit

The first visit is a measure, not a sales call. We walk the fence line with you, check the grade and how the ground drains, and test how deep the basalt sits — Jerome County is Snake River Plain lava rock capped with three to ten feet of windblown loess, and which of those your posts land in changes the job. We confirm where the property line actually runs, count the gates, and note whether equipment can reach the line. Then you get a written per-foot price with removal and gates as separate lines.

If we think repair is the better spend than replacement, or a different material suits your situation better, we say so on that visit — including when it means the smaller job for us.

What's included

On-site measure and a written per-foot price before any work starts
811 Digline utility locate scheduled and confirmed before we dig
Posts set in concrete to depth, plumbed on a laser line
Powder-coated tubular steel panels in your profile and height
Racked panels on graded runs so the fence follows the ground cleanly
Flush-mount or surface-mount brackets as the site requires
Gates with weight-rated hinges and latch hardware
Touch-up on any coating nicked during installation

What this costs in Jerome

Ornamental Iron Fence Installation runs $35–$70 per linear foot installed in this area. Regional installed ranges for powder-coated steel picket systems; panel height and gauge drive the spread. The things that move a job up its range are gate count, how much old fence has to come out, whether we can get equipment to the line, slope, and how shallow the rock is. If you want a number before you call, the fence cost calculator will get you close.

When it needs doing

Coating chipped down to bare steel
Rust bleeding at weld points
Gate sagging out of square
Loose brackets at posts

DIY, the cheapest bid, or the job done properly

	DIY weekend	Cheapest bid	Done properly
Post depth	Whatever the auger reached before hitting rock	Frost minimum, regardless of panel size	Sized to the panel’s wind area and your soil
Hitting basalt	Job stops; rental auger goes back	Post set shallow and concreted over	Rock auger or breaker; depth still met
Old footings	Left in the ground	Snapped at grade, line shifted over	Extracted, new posts in solid ground
Hardware	Whatever the box store stocked	Electroplated — rusts near irrigation	Hot-dip galvanized or stainless
811 locate	Often skipped	Sometimes skipped	Filed and cleared every time
If it fails	Your weekend, again	Chasing a phone number that stopped working	We come back and fix it

How it works

How ornamental iron fence installation runs

01
Free on-site measure
We walk the line, discuss profile and height, and give you a written per-foot price at no charge.
02
Locate and order
811 locate filed, panels ordered in your profile and color. Steel is a made-to-order item, so lead time sits here.
03
Set and hang
Posts set plumb in concrete on exact panel centers, then panels bracketed and racked to grade.
04
Gates and walkthrough
Gates hung and adjusted, coating touched up, debris hauled, and we walk the line with you.

Questions

Ornamental Iron Fence Installation questions

Will an iron fence rust in Jerome?

Modern ornamental fencing is not raw wrought iron — it is tubular steel with a galvanized substrate and a baked powder coating, and in a climate with 9.9 inches of annual precipitation it holds up very well. The failure point is mechanical damage: a mower nick or a trailer scrape that breaks the coating and lets water sit. Touch-up paint on the day it happens prevents essentially all of it.

Iron or aluminum — which should I pick?

Steel is stronger and better suited to security applications and taller runs; aluminum will never rust at all and costs less to ship and handle. For a front-yard decorative fence in Jerome, aluminum is usually the better value. For a driveway gate, an estate entry, or anywhere the fence needs to resist force, steel is the right call.

Can an iron fence follow a sloped yard?

Yes. Rackable panels pivot at the picket-to-rail connection and follow grade continuously, which looks far better than stepping panels down in blocks. Not every profile racks, and how much it racks varies, so tell us about the slope at the measure and we will spec a panel that handles it.

Does an ornamental fence meet pool code?

Only if it is specified for it. Pool barriers have requirements a decorative fence does not automatically meet — barrier height, no gaps a small child can pass, a non-climbable face, and a self-closing self-latching gate. If the fence will enclose a pool, say so up front and we will spec to the barrier requirements.

Do you charge for an estimate?

No. Estimates are free across Jerome and the Magic Valley, including the drive. We walk the line with you, check how deep the rock sits on your lot, and hand you a written per-foot price with removal and gates broken out as their own lines.

Also worth a look

Related services

Aluminum Fence Installation

Rackable powder-coated aluminum that follows grade, never rusts, and meets pool-barrier requirements when specified for it.

Request a ornamental iron fence installation estimate

Tell us what you need and we will call you back the same day.

Ornamental Iron Fence Installation in Jerome, ID